Welcome to homepage of Brothers-Y Cable and wire stock !

Website map|add to favourites

Brothers  YoungBrothers Young

FAX:+86-0755-85232320Email:info@brothers-ycable.net

Hot searches:

Current location: Home » News Center » Industry dynamics » Brothers-Y News » Cable sheath flame retardant and fireproof properties

Cable sheath flame retardant and fireproof properties

Categories: Brothers-Y NewsStars: 3StarsVisit: -Release time: 2013-07-16 22:23:00
 Font size:【 Large Middle SmallSource: Brothers YoungEditor: Author:

 

Fire retardant (Flame proof) cable is the floorboard of the cable fire performance and is usually divided into two categories, Flame retardant cable and fire-resistant cables. Starting from the fire security and its lifesaving, for cable fireproof performance requirements more and more, for example: Flame retardant (Flame retardancy) - block and delay the spread of fire along the cable, the fire is not expanded. Fire (Fire hold) - in the case of flame can maintain the operation of time, that maintain integrity of Circuit (Circuit integrity). The research and development of flame-retardant and fire-resistant cables in China began in 1982. After five years, many cable manufacturers has been put into production, its products have been agreed upon by the user.

 

flame retardant properties
Don't called the fire FLAME RETARDANT, FLAME RETARDANT and international general FLAME RETARDANT suit, because RETARDANT is delay and stop. According to IEC332, flame retardant with single or bundle. In order to assess the cable fire retardant performance, the international electrotechnical commission respectively established, IEC332 and IEC332 IEC332-1-2-3 three criteria. And IEC332 IEC332-1-2 respectively used for evaluation of single cable according to the inclined and vertical cloth flame retardant ability (national standard corresponding GB12666.3 and GB12666.4), IEC332-3 vertical fuel corresponding GB12666.5 (gb - 90), in contrast to vertical beam on the flame retardant ability request much higher.


Refractory characteristics
According to Chinese standard GB 12666.6 90, refractory divided into class A and class B two levels. For class A fire temperature is 950 ℃ ~ 1000 ℃, B type for the fire temperature is 750 ℃ ~ 800 ℃. According to IEC 331-1970 standard requirements, be equivalent to the standard class B in our country. But, in recent IEC in the newly published standard IEC60331-1999, for the fire temperature is 750 ℃ ~ 800 ℃, and the Suggestions for the improvement of test temperature is still under consideration. As A result, such as equivalent by compiling the new national standard, fire rating, there is no distinction of classes. A class B